The Story
What you get
Better fabric. Better foam. Fits like it was made for the seat, because it was.
Alcantara-Style Fabric Finish
The soft-touch Alcantara-style material gives your TR Series seat a premium motorsport feel that the standard cloth does not match. It looks better, feels better and holds up well under regular use.
11-Piece Complete Set
Covers the full seat, back, base, sides and shoulders. Every contact point gets a fresh cushion, so there are no mismatched panels or partial upgrades to deal with.
Supportive PU Foam Construction
The foam backing is firm enough to support proper posture over a long stint but soft enough to take the edge off a hard fibreglass shell. The balance is what makes the difference on two-hour sessions compared to thinner aftermarket pads.
Precision Fit for SA-11, SA-12 and SA-13
Designed specifically for these three TR Series seats, not adapted from a generic pattern. Each cushion follows the contours of the fibreglass shell for a clean, factory-style result with no gaps or bunching.
Easy-Clean Surface
The Alcantara-style material wipes down easily, which matters in shared sim environments, commercial training rigs and any setup where multiple drivers use the same seat across a week.
Replaces Worn or Aging Original Cushions
TR Series seats have a long life in them, the fibreglass shell does not wear out. But cushions do. This set gives you a clean, practical way to restore a seat that is still structurally fine but no longer comfortable to sit in for extended sessions.
The Detail
Eleven cushions. One complete upgrade.
Fabric and Foam
Soft-Touch Alcantara-Style Material Over Supportive PU Foam
Premium Feel · Pressure Relief · Long-Session Comfort
The combination of Alcantara-style outer fabric and PU foam backing is what separates this set from a basic replacement pad. The fabric has the tactile quality you expect from higher-end motorsport seats, and the foam underneath does the real work, distributing pressure evenly and reducing fatigue over extended stints in iRacing, Assetto Corsa Competizione, and endurance sessions.
- Alcantara-style outer fabric, Soft-touch, motorsport-inspired finish.
- PU foam backing, Firm support without harshness on the fibreglass shell.
- Easy-clean surface, Practical for home and commercial sim environments.
Fit and Coverage
Built for SA-11, SA-12 and SA-13, All 11 Contact Points
Back · Base · Sides · Shoulders · Precision Cut
The 11-piece set covers every part of the seat you actually touch, back panels, seat base, side bolsters and shoulder sections. Each cushion is cut to match the contour of the TR Series fibreglass shell, so the fit is clean and consistent across the whole seat rather than just the main contact areas.
- 11 individual pieces, Complete coverage, no partial upgrades.
- Compatible with SA-11, SA-12, SA-13, Precise fit by design, not generic sizing.
- Shell stays, cushions refresh, No need to replace the whole seat.
Will it fit your seat?
Made for the Trak Racer TR Series GT fibreglass bucket seats
This 11-piece set is cut specifically for the Trak Racer TR Series GT-style fibreglass bucket seats sold below (model codes SA-11, SA-12 and SA-13). If you own one of these seats, the cushions fit straight onto the shell. It is not made for the GT Pro, Rally-Pro or other Trak Racer seats, which use a different shell.
Technical specifications
TR Series Seat Cushion Set, Full Specifications
Trak Racer · SA11-SC1
TR Series Alcantara-Style Replacement Seat Cushion Set
What's included
In the box
- 11-piece Alcantara-style replacement cushion set
- Back cushion panels, seat base cushion, side bolster cushions, shoulder section cushions
- Compatible with Trak Racer SA-11, SA-12 and SA-13 seats only. Seat sold separately.
Common questions
Frequently asked questions
Fit and Compatibility
Which Trak Racer seats does this cushion set fit?
This cushion set is designed specifically for the Trak Racer TR Series fibreglass bucket seats, the SA-11, SA-12 and SA-13. It will not fit other seats in the Trak Racer range such as the GT Pro (SA-15) or Rally-Pro (SA-14), as those use different shell geometry. If you are unsure which seat you have, check the label on the underside of your seat shell or call us on 0488 385 870.
Does it come with all the cushions needed to cover the whole seat?
Yes, the set includes 11 individual cushions covering every part of the seat you sit against: the back panels, seat base, side bolsters and shoulder sections. It is a complete replacement kit, so you are not left with mismatched panels or gaps in coverage.
How do the cushions attach to the seat?
The cushions are designed to fit the contours of the TR Series fibreglass shell precisely. They attach using the standard fixing points on the seat shell. If you have any questions about fitting or need installation guidance, call us on 0488 385 870 and we can walk you through it.
Materials and Comfort
What is Alcantara-style fabric and how does it differ from standard cloth?
Alcantara-style fabric is a synthetic suede material that replicates the soft-touch, premium feel of genuine Alcantara, the same material used in high-end motorsport and automotive interiors. Compared to standard woven cloth, it has a finer texture, a more refined look, and a more comfortable feel against your race suit or casual clothing. It also tends to hold its appearance better over time than plain cloth under regular use.
How does this improve comfort over the standard TR Series cushions?
The upgrade is most noticeable in two areas. First, the Alcantara-style fabric is softer and more tactile than the standard cloth, it simply feels better to sit in. Second, the PU foam backing is designed to distribute pressure more evenly across the seat base and back, which reduces fatigue during long sessions. If you run regular endurance stints or spend several hours at a time in your rig, the difference becomes significant.
Are the cushions easy to clean?
Yes, the Alcantara-style surface wipes down easily with a damp cloth, which makes it practical for both home sim setups and commercial training environments where multiple drivers use the same rig. Avoid abrasive cleaners, which can damage the fabric texture over time.
Buying in Australia
What warranty is included?
The cushion set is covered by a 1-year warranty against manufacturing defects, excluding normal wear and tear from regular use. Your purchase is also covered by Australian Consumer Law, which provides statutory guarantee rights including repair, replacement or refund for major failures. Player1 Sim Gear is a fully authorised Australian Trak Racer dealer, call us on 0488 385 870 if you have any warranty questions.
How is the cushion set shipped in Australia?
Player1 Sim Gear ships Australia-wide. The cushion set is a lightweight parcel and ships via standard courier. For a delivery estimate to your suburb, call us on 0488 385 870 or send us a message.
Complete your seat setup
The seat, the slider and the rig to put it all in
Fresh cushions make the biggest difference when your seat is already positioned perfectly. Pair the upgrade with the right cockpit and slider.
Not sure if this fits your seat?
Player1 Sim Gear is a fully authorised Australian Trak Racer dealer. We can confirm compatibility with your seat model and answer any questions about the cushion set before you order. Ships Australia-wide.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
What you get
Better fabric. Better foam. Fits like it was made for the seat, because it was.
Alcantara-Style Fabric Finish
The soft-touch Alcantara-style material gives your TR Series seat a premium motorsport feel that the standard cloth does not match. It looks better, feels better and holds up well under regular use.
11-Piece Complete Set
Covers the full seat, back, base, sides and shoulders. Every contact point gets a fresh cushion, so there are no mismatched panels or partial upgrades to deal with.
Supportive PU Foam Construction
The foam backing is firm enough to support proper posture over a long stint but soft enough to take the edge off a hard fibreglass shell. The balance is what makes the difference on two-hour sessions compared to thinner aftermarket pads.
Precision Fit for SA-11, SA-12 and SA-13
Designed specifically for these three TR Series seats, not adapted from a generic pattern. Each cushion follows the contours of the fibreglass shell for a clean, factory-style result with no gaps or bunching.
Easy-Clean Surface
The Alcantara-style material wipes down easily, which matters in shared sim environments, commercial training rigs and any setup where multiple drivers use the same seat across a week.
Replaces Worn or Aging Original Cushions
TR Series seats have a long life in them, the fibreglass shell does not wear out. But cushions do. This set gives you a clean, practical way to restore a seat that is still structurally fine but no longer comfortable to sit in for extended sessions.
The Detail
Eleven cushions. One complete upgrade.
Fabric and Foam
Soft-Touch Alcantara-Style Material Over Supportive PU Foam
Premium Feel · Pressure Relief · Long-Session Comfort
The combination of Alcantara-style outer fabric and PU foam backing is what separates this set from a basic replacement pad. The fabric has the tactile quality you expect from higher-end motorsport seats, and the foam underneath does the real work, distributing pressure evenly and reducing fatigue over extended stints in iRacing, Assetto Corsa Competizione, and endurance sessions.
- Alcantara-style outer fabric, Soft-touch, motorsport-inspired finish.
- PU foam backing, Firm support without harshness on the fibreglass shell.
- Easy-clean surface, Practical for home and commercial sim environments.
Fit and Coverage
Built for SA-11, SA-12 and SA-13, All 11 Contact Points
Back · Base · Sides · Shoulders · Precision Cut
The 11-piece set covers every part of the seat you actually touch, back panels, seat base, side bolsters and shoulder sections. Each cushion is cut to match the contour of the TR Series fibreglass shell, so the fit is clean and consistent across the whole seat rather than just the main contact areas.
- 11 individual pieces, Complete coverage, no partial upgrades.
- Compatible with SA-11, SA-12, SA-13, Precise fit by design, not generic sizing.
- Shell stays, cushions refresh, No need to replace the whole seat.
Will it fit your seat?
Made for the Trak Racer TR Series GT fibreglass bucket seats
This 11-piece set is cut specifically for the Trak Racer TR Series GT-style fibreglass bucket seats sold below (model codes SA-11, SA-12 and SA-13). If you own one of these seats, the cushions fit straight onto the shell. It is not made for the GT Pro, Rally-Pro or other Trak Racer seats, which use a different shell.
Technical specifications
TR Series Seat Cushion Set, Full Specifications
Trak Racer · SA11-SC1
TR Series Alcantara-Style Replacement Seat Cushion Set
What's included
In the box
- 11-piece Alcantara-style replacement cushion set
- Back cushion panels, seat base cushion, side bolster cushions, shoulder section cushions
- Compatible with Trak Racer SA-11, SA-12 and SA-13 seats only. Seat sold separately.
Common questions
Frequently asked questions
Fit and Compatibility
Which Trak Racer seats does this cushion set fit?
This cushion set is designed specifically for the Trak Racer TR Series fibreglass bucket seats, the SA-11, SA-12 and SA-13. It will not fit other seats in the Trak Racer range such as the GT Pro (SA-15) or Rally-Pro (SA-14), as those use different shell geometry. If you are unsure which seat you have, check the label on the underside of your seat shell or call us on 0488 385 870.
Does it come with all the cushions needed to cover the whole seat?
Yes, the set includes 11 individual cushions covering every part of the seat you sit against: the back panels, seat base, side bolsters and shoulder sections. It is a complete replacement kit, so you are not left with mismatched panels or gaps in coverage.
How do the cushions attach to the seat?
The cushions are designed to fit the contours of the TR Series fibreglass shell precisely. They attach using the standard fixing points on the seat shell. If you have any questions about fitting or need installation guidance, call us on 0488 385 870 and we can walk you through it.
Materials and Comfort
What is Alcantara-style fabric and how does it differ from standard cloth?
Alcantara-style fabric is a synthetic suede material that replicates the soft-touch, premium feel of genuine Alcantara, the same material used in high-end motorsport and automotive interiors. Compared to standard woven cloth, it has a finer texture, a more refined look, and a more comfortable feel against your race suit or casual clothing. It also tends to hold its appearance better over time than plain cloth under regular use.
How does this improve comfort over the standard TR Series cushions?
The upgrade is most noticeable in two areas. First, the Alcantara-style fabric is softer and more tactile than the standard cloth, it simply feels better to sit in. Second, the PU foam backing is designed to distribute pressure more evenly across the seat base and back, which reduces fatigue during long sessions. If you run regular endurance stints or spend several hours at a time in your rig, the difference becomes significant.
Are the cushions easy to clean?
Yes, the Alcantara-style surface wipes down easily with a damp cloth, which makes it practical for both home sim setups and commercial training environments where multiple drivers use the same rig. Avoid abrasive cleaners, which can damage the fabric texture over time.
Buying in Australia
What warranty is included?
The cushion set is covered by a 1-year warranty against manufacturing defects, excluding normal wear and tear from regular use. Your purchase is also covered by Australian Consumer Law, which provides statutory guarantee rights including repair, replacement or refund for major failures. Player1 Sim Gear is a fully authorised Australian Trak Racer dealer, call us on 0488 385 870 if you have any warranty questions.
How is the cushion set shipped in Australia?
Player1 Sim Gear ships Australia-wide. The cushion set is a lightweight parcel and ships via standard courier. For a delivery estimate to your suburb, call us on 0488 385 870 or send us a message.
Complete your seat setup
The seat, the slider and the rig to put it all in
Fresh cushions make the biggest difference when your seat is already positioned perfectly. Pair the upgrade with the right cockpit and slider.
Not sure if this fits your seat?
Player1 Sim Gear is a fully authorised Australian Trak Racer dealer. We can confirm compatibility with your seat model and answer any questions about the cushion set before you order. Ships Australia-wide.
